Adding more audio outputs – Aviom AV-M8 User Manual
Page 46
38
Av-M8 M
ic
i
nput
M
odule
u
ser
G
uide
Plug a Cat‑5e cable into the
4.
a-N
et
I
N
port on the first
output module. This cable will be used to span up to 500
feet/150 meters between the two sides of the network.
Connect the cable from the
5.
a-N
et
I
N
port in Step 4 to the
a-N
et
o
ut
port on the second Pro16 Series input module.
Connect the second group of 16 audio sources to inputs
6.
1‑16 on the second Pro16 Series input module.
Connect a Cat‑5e cable from the
7.
a-N
et
e
xpaNSIoN
port on
the second input module to a-N
et
I
N
on the second Pro16
output module.
Patch the audio outputs from the two output modules into
8.
the desired destinations.
Adding More Audio Outputs
As mentioned previously, the A‑Net Out ports on AN‑16/o and AV‑P2 Output
Modules and Personal Mixer products remain available even when creating
a bidirectional audio network. This allows additional output modules to
be added as needed to suit a variety of audio situations. Any Pro16 A‑Net
compatible product with an A‑Net In can be connected to an A‑Net Out
port. This flexible routing scheme allows you to send audio to a variety of
different locations, and to include Aviom’s Pro16 Monitor Mixing System for
mic applications.
Channels 1-16 In
Channels 1-16 Out
Channels 17-32 Out
Channels 17-32 In
Channels 17-32 Out
Channels 17-32 Out
Channels 17-32 Out
A-Net
A-Net Expansion
Channels 1-16 Out
Channels 1-16 Out
Channels 1-16 Out
Audio channels 17-32
Audio channels 1-16
Pro16 Input
Pro16 Input
Pro16 Output
Pro16 Output
Pro16 Output
Pro16 Output
Pro16 Output
Pro16 Output
Pro16 Output
Pro16 Output
Digital copies of each 16-channel output stream have been added.