BUCHI KjelFlex K-360 - Manual (Page 27)

5 Putting into operation
27 KjelFlex K-360 Operation Manual, Version C
5 .5 .1 Connecting a printer
The K-360 supports printers with USB port and language PCL 3 or higher (e.g. PCL 5, PCL 5e, PCL
6, PCL 7 etc.) which are available e.g. from Hewlett Packard or Lexmark.
The printer is connected to the USB port.
To print out the results directly after each determination, go to Configuration > Titrator and set Print
Data to Yes. You also have to configure the titrator for data printout. For this purpose, please consult
the corresponding manual.
The following printers have been tested together with the K-360:
HP Color LaserJet 3700DN •
HP Deskjet 1280c •
Brother mfc 8820d •
Lexmark E120 •
Lexmark E240 •
HP OfficeJet Pro K550 •
Brother HL-5240 •
OKI B4250 •
The following printer causes problems:
HP LaserJet 1022 •
5 .5 .2 External keyboard
As an option, an external keyboard can be connected to the instrument to make data entry more
comfortable. The internal keyboard is still active, even if an external keyboard is connected.
Special functions on the external keyboard are:
Table 5-1: External keyboard
K-360 keyboard External keyboard
START F3
STOP F2
Function key below display F5...F8
Other functions (e. g. up/down) are the same as on the internal keyboard.