BUCHI KjelFlex K-360 - Manual (Page 37)

6 Operation
37 KjelFlex K-360 Operation Manual, Version C
NOTE
The day, month and year settings can be entered with one or two digits.
6 .4 .3 Defining general instrument settings
Go to Settings and press Enter. The following screen appears:
Fig. 6.5: Settings
The following settings can be entered:
Language •
Display Contrast •
Demo Mode •
Endless Mode •
Level Sensor Waste •
Receiving Vessel present •
Reagent pump present •
Enter the desired settings via arrow buttons and press Save to store them. These settings have to be
defined before the instrument is used for the first time.
6 .4 .4 Defining the titrator settings
Go to Titrator and press Enter. The following screen appears:
Fig. 6.6: Titrator
Press Edit to edit the settings. By changing the number at “Titrator present” the settings for the titra-
tors listed in the following table will be adjusted automatically.