Checkline FGS-220VC - Manual (Page 18)

- 13 -
Parameter
The parameter, which is the dwell timer and the speed of pull and push, is available.
Pressing SET button, the speed can be changed by UP or DOWN button of the SPEED key. The dwell timer
can be changed by STOP.
Finally press SET button for saving.
If you want to cancel the setting, press ZERO button.
Setting speed
The UP or DOWN button of the
SPEED can be used to change.
The range is o.40-15.75 in/min(10
to 400 [mm/min].
Setting dwell timer
The STOP button of the dwell time
can be used to change.
Pressing STOP, the dwell timer is
incremental.
When the dwell timer is 5s, it
returns to 0s pressing STOP.
SET
SET
SET
Saving, return to SING mode