Checkline FGS-220VC - Manual (Page 6)

- 1 -
1. Prior to use
1.1. Procedure from the Installation of a force gauge to the measurement
FGS-VC can measure various loads using Shimpo's digital force gauges which are FGV series.
Confirm the following procedures before use.
1.2. Confirmation of product packing
FGS-VC 1 Cable to force gauge 1
Cable clip 1 USB cable (2m) 1
Hex-head spanner 1 Bolt (M8 x 8mm) 4
Socket bolt (M6 x 16mm) 2 Set screw (M6 x 20mm) 1
Washer 2 Manual 1
Confirm the parameter
setting of the force gauge
Install the force gauge. Connect the cables.
Measure each mode. Troubleshooting
Problem