Checkline FGS-220VC - Manual (Page 25)

- 20 -
Point 1 to 5
Return to
“Start point”
Movement Distance at P1
The parameter is the distance
from "Standard point" to "P1".
Also the data should be set as
relative coordination.
The PUSH or PULL button can
be used to change.
SET
Saving, return to PROG mode
Movement direction at
P1
The parameter is the
direction of movement
from
“Standard point” to
“Point 1”.
The MAX button can be
changed to Push or Pull
alternately.
Speed at P1
This parameter is the speed
setting for moving from "Start
point" to "Detect point".
The UP or DOWN button of the
SPEED can be used to change.
SET
SET
Dwell timer at P5
This parameter is the dwell timer.
Pressing STOP, the dwell timer is
incremental.
When the dwell timer is 5s, it
returns to 0s pressing STOP.
Previous page
Setting P2 to P4
Speed at RET
This parameter is the speed
setting for moving from "Point 5"
to "Start point".
The UP or DOWN button of the
SPEED can be used to change.
Dwell timer at RET
This parameter is the dwell timer.
Pressing STOP, the dwell timer is
incremental.
When the dwell timer is 5s, it
returns to 0s pressing STOP.
SET