FRITSCH PULVERISETTE 0 - Manual (Page 18)

4 Installation
4.1 Transport
The device is delivered in a cardboard box. In the case of delivery with
several accessories, the device is delivered in a transport crate.
WARNING!
Improper lifting can lead to personal injury or property
damage. The machine must only be lifted with suitable
equipment by qualified personnel.
The guarantee excludes all claims for damage due to improper transport.
4.2 Unpacking
n In the case of delivery in a crate, pull out the nails that fasten the lid
to the surrounding packaging.
n Remove the lid.
n Take out the accessories.
n To remove the device, three hexagon screws under the wooden
plate must be unscrewed.
n Compare the contents of the delivery with your order.
Keep the wooden plate, screws and washers, as this trans‐
port securing device must be reattached in the case of fur‐
ther transport or return.
4.3 Setting up
n Place the device on a flat, stable surface. It does not have to be fas-
tened to the surface. Leave sufficient space beside the device for
placing the accessories used.
n The space behind the device must be freely accessible so that the
main switch on the mains connection can be accessed quickly in case
of emergency.
n The device rests on three flat coil spring assemblies. Level the micro
mill:
– PULVERISETTE 0:
Level the micro mill by screwing these feet in or out so that
during grinding, the grinding stock is evenly distributed on the
walls of the mortar bowl.
Installation
- 18 -