FRITSCH PULVERISETTE 0 - Manual (Page 33)

7.2.5 Setting the sieving time
The sieving time can be set in increments of minutes using the +/- keys.
Values between 1 and 99 minutes are possible; after a sieving time of 1
hour, let the device cool down.
Continuous operation is set by holding down the "-" key until "P" or "00"
appears on the display.
7.2.6 Einstellung und Anzeige der Amplitude
This is done in the same way for sieving as for grinding with the mortar
attachment. (see Ä Chapter 6.3 ‘Setting the amplitude’ on page 25 and
Ä Chapter 6.3.1 ‘Displaying the amplitude’ on page 25)
Accessories
- 33 -