FRITSCH PULVERISETTE 0 - Manual (Page 34)

7.2.7 TorqueMaster for easy clamping of the sieve set
As an alternative to standard clamping devices, the Torque‐
Master can be used for faster and more accurate clamping.
1 TorqueMaster clamping unit with toothed belt
2 Clamping lid
3 Hexagon socket bit (5.5)
4 Cordless screwdriver (with battery and charger)
5 Unclamping aid
NOTICE!
The unclamping aid included is to be used exclusively for
releasing a clamped sieve stack (in case of malfunction of
the cordless screwdriver). The unclamping aid has no
torque limitation, and if it is used for clamping, prevention
of operating errors and possible irreparable damage to the
clamping unit can therefore not be guaranteed.
7.2.7.1 Fitting the TorqueMaster clamping device
The sieves are fitted as described in Ä Chapter 7.2.1.2 ‘Fitting and
clamping the sieves’ on page 26. To clamp using the TorqueMaster pro-
ceed as follows:
Accessories
- 34 -