FRITSCH PULVERISETTE 25 - Manual (Page 14)

page 13
PULVERISETTE 25
2.4 Danger Points
x The cover flap (6) can be lifted out of the hinges. When
opening up the upper housing (2), it is possible to leave the
cover flap (6) in the hinge. If this is the case, it is important to
ensure that the cover flap (6) is not lifted out of the hinge
while the upper housing (2) is opened.
x An initial resistance will be felt when the upper housing (2) is
being opened.
x Ensure that the cover flap (6) does not swing round violently
and consequently drop out of the hinges.
x When opening the upper housing (2), slowly open it until it is
resting on the rubber buffer. Do not let it drop down violently.
x There is a danger of crushing when the upper housing (2) is
being closed - for this reason, the upper housing (2) should
be closed slowly.
x After checking that the rotor (3) rotates freely (chapter 4.1.6),
the Allen key must be removed immediately!
X