FRITSCH PULVERISETTE 25 - Manual (Page 28)

page 27
PULVERISETTE 25
8. Carefully push back the motor cover (14).
9. Use a screwdriver to unscrew the cap covering the opening
for running the funnel cable through.
10.Pull off the angled screw coupling located on the funnel cable
(push the clamping ring down) and screw it into the motor
cover.
11.Then run the funnel cable through the screw coupling to
inside the instrument.
12.If the cable sticks, do as follows (see circuit diagrams in the
service manual):
x Remove the cable link S4 from terminals 2 and 2.1.