Maintenance – FRITSCH PULVERISETTE 13 premium line User Manual
Page 45
4.
Remove the motor fastening screw (m) under the oil drain screw
(n) with a hexagon socket screw key M10.
There is about 0.22 litres of ISO VG 220 gear oil in the
gears.
5.
Hold a flat container under the oil drain screw (n) and unscrew it
with a no. 5 hexagon socket screw key until oil flows out.
6.
Allow the oil to drain from the gears completely (about 0.22 L).
Keep the size of the collecting container in mind and empty during
the process if necessary; for this, screw the oil drain screw back in.
7.
Once the gear oil has been emptied completely, remove the drain
screw.
8.
Clean up any gear oil that spills with a paper towel and clean the
contact surface of the drain screw.
9.
Screw the drain screw and sealing washer back in firmly.
10.
Remount the motor fastening screw.
11.
Afterwards, the filling screw (o) can be removed.
12.
Insert a funnel into the bore and fill the gears with 0.22 litre ISO
VG 220 gear oil, (order no.: 85.0110.00).
13.
Screw in the filling screw (o) with a clean seal.
14.
Mount the housing cover.
Maintenance
- 45 -