Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 13)

OCS User Guide
Page 10 of 24
In V IEW T OTAL M ODE , the weight reading keeps flashing to distinguish itself from that in
W EIGHING M ODE .
Apparently, T OTAL is the sum of history weight readings, which can be so great that the 5
digits screen is not able to display correctly. The T OTAL is therefore divided into two parts, the
low 5 digits format, and the high 5 digits format.
For example, the totalized weight reading “129235.0” will be displayed “9235.0” as its low
5 digits format, like below.
The high 5 digits format of “29235.0” is like below.
To learn more about View Total, please refer to View Total in 6 Advanced Operation
section.
Idle Mode
Action
No buttons or keys are required to enter the I DLE M ODE .
Function
In I DLE M ODE , the screen dims its brightness to save battery power. Except for this
power‐saving feature, all the operations are the same as in other modes.
To learn how to configure Idle Mode, please refer to Idle Timing of System Setup in
6Advanced Operation section.
2nd Mode
Action
To enter the 2 ND M ODE , press 2ND button on scale or on remote controller, when
scale is in W EIGHING M ODE .
Function
The 2 ND M ODE is designed to make full use of keys on remote controller. Different key
pressing combination, results in different function.
2 ND M ODE
NOTICE:
Any buttons on scale or keys on remote controller will wake the scale
up from its I DLE M ODE , light the screen up in result.
I DLE M ODE
NOTICE:
All other functions are disabled in V IEW T OTAL M ODE .