Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 16)

OCS User Guide
Page 13 of 24
;
The scale must not be in H OLD mode. Otherwise, error message will keep
flashing.
;
The Last Total must be greater than 0 (or 0.0 or 0.00, depending on the resolution) or has
not been deleted. Otherwise, error message
will flash.
Clear Total
Action
To clear the overall Total, press and on remote controller in turn .
Function
In order to start a new series of Totals, the old T OTAL can be erased completely by C LEAR
T OTAL .
The screen displays the below message, indicating that the T OTAL is successfully erased.
Condition
;
The scale must not be in H OLD mode. Otherwise, error message will keep
flashing.
Display Unit Switch
Action
To change the scale’s D ISPLAY U NIT , press 2ND button on scale or on remote controller,
and ZERO button on scale or on remote controller in turn.
Function
The scale switches to 2 ND M ODE , and then recognizes Z ERO action as D ISPLAY U NIT
S WITCHING action. D ISPLAY U NIT S WITCHING toggles between kg (metric system) and lb
(imperial system).
The screen flashes the unit to change, and returns to W EIGHING M ODE .
The lb indicator lights on, after D ISPLAY U NIT switches to lb.
The kg indicator lights on, after D ISPLAY U NIT switches to kg.
Condition
D ISPLAY U NIT S WITCH
C LEAR T OTAL