Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 18)

OCS User Guide
Page 15 of 24
Resolution Switch
Action
To switch scale’s resolution, press and on remote controller in turn.
Function
The screen flashes the resolution to change in descending order, like 5kg, 2kg, 1kg
(available optional resolution ranges from 0.01 kg or lb to 50 kg or lb, depending on scale’s
capacity). After R ESOLUTION S WITCH , new resolution takes effect.
To balance between accuracy and measurement speed in high resolution mode,
A NTI ‐M OTION L EVEL can be changed to fit your measurement application.
To learn how to set Anti‐Motion Level, please refer to the Anti‐Motion Level in 6
Advanced Operation section.
Condition
;
The scale must not be in H OLD mode. Otherwise, error message will keep
flashing.
Battery Check
B ATTERY C HECK
R ESOLUTION S WITCH
NOTICE:
R ESOLUTION S WITCHING will change the apparent overloading range of
the scale. For example, if the resolution of a 3000kg scale is switched to
0.5kg, it will overload at a new weight of 3004.5kg (3000 + 9*0.5), while by
default, it overloads at a weight of 3009kg (3000 + 9*1).
NOTICE:
High resolution offers better accuracy at the cost of longer measuring
time and stricter requirement of load’s stability. Designed to meet the OIML
R76’s directive, this scale has the best (default) performance at 2000 to
3000 division.
NOTICE:
The default resolution will be restored next time when the scale is
powered on or enter System Setup Mode (no matter the setting is changed
or not). To save the changes in resolution for later, use S YSTEM S ETUP
function, rather than R ESOLUTION S WITCHING .
NOTICE:
Setting or changing TARE has no effect on the ZERO setting.