Holtgreven USED OCS-B 40,000 lb (x 20) - Manual (Page 23)

OCS User Guide
Page 20 of 24
Scale Address
For multiple scales application, address can be assigned to identify the uniqueness. Scale
sends out address number in the serial communication protocol.
S CALE A DDRESS can be assigned from 00 to 99.
By default, S CALE A DDRESS is set to 00.
To learn more about serial communication protocol, please refer to Technical Manual.
Output Mode
There are optional two modes of data output, “0” continuous way, and “1” manual way.
In “0” continuous way, scale sends out data continuously all the time, while in “1” manual
way, scale only sends data out when key is pressed.
The default O UTPUT M ODE is set to “0” continuous way.
S CALE A DDRESS
O UTPUT M ODE