Holtgreven USED OCS-B 40,000 lb (x 20) User Manual
Page 8
OCS User Guide
Page 5 of 24
;
The scale must be stable. Otherwise, error message
will flash.
;
Current weight reading must be greater than 0 (or 0.0 or 0.00, depending on the resolution).
Otherwise, error message
will flash.
;
Current weight reading must be fewer than 100% scale’s M
AXIMUM
C
APACITY
. Otherwise,
error message
will flash.
;
The scale must be in gross mode. Otherwise, this action will be recognized as T
ARE
O
UT
.
Tare Out
Action
To T
ARE
O
UT
the tare weight out of scale, press TARE button on scale or
on remote
controller (when the scale is in N
ET
M
ODE
).
Function
The scale clears the tare weight, returns to gross mode, and displays all subsequent
readings in G
ROSS
M
ODE
.
The TARE indicator
lights off.
The weight reading is added with tare weight.
Condition
;
The scale must not be in H
OLD
mode. Otherwise, error message
will keep
flashing.
;
The scale must be in N
ET
M
ODE
. Otherwise, this action will be recognized as T
ARE
I
N
.
Hold
Action
To H
OLD
the weight reading, press HOLD button on scale or
on remote controller.
Or
To unlock current reading, press HOLD button on scale or
on remote controller again.
Function
The HOLD indicator
lights on.
All subsequent readings are locked to current reading.
Or
The HOLD indicator
lights off.
The weight reading is unlocked.
Condition
;
To H
OLD
the scale, it must be stable. Otherwise, error message
will flash.
NOTICE:
Setting or changing TARE has no effect on the ZERO setting.
NOTICE:
Tareing will reduce the apparent overloading range of the scale.
For example, if a 1000kg container is tared and the scale maximum
capacity is 5000kg, the scale will overload at a new weight of 4009kg (5000
– 1000 + additional 9 divisions).
H
OLD
T
ARE
O
UT