Inovonics Radius Installer - Manual (Page 20)

High Power Repeater Installation and Configuration
6.24.13 06325C © Inovonics, 2013 - www.inovonics.com 19
4 Select the EN6040 network coordinator.
5 Check the box for “Add new Echostream repeaters to NID when Reset
button pressed.”
6 Click “Administration.”
7 Click “Monitored Devices.”
8 Select “Repeaters and Locators” from the drop down menu.
9 Click the name of the repeater in the “Device Description” field.
10 Enter a description in the “Monitored Device Description.”
• The text entered here is what will be displayed on the main screen and in
reports.
11 As desired, enter any notes in the “Notes” field.
12 As desired, set a minimum signal strength for the purposes of location in
the “Minimum signal strength for location (0-100).”
13 Click “Update Monitored Device.”