1 configure the dialogic board, Chapter 6 – Inovonics Radius Installer User Manual
Page 27
6.24.13 06325C © Inovonics, 2013 - www.inovonics.com
26
Chapter 6
Dialogic® D/41JCT-LS Combined Media Board
Installation and Configuration
6.1 Dialogic® D/41JCT-LS Combined Media Board
Installation
The Radius server can support one or more Dialogic combined media boards
to allow the system to make and receive phone calls.
Note:
The Dialogic combined media board can only be used with a standard analog
phone line. The combined media board will not work with a digital phone line.
The Radius system can support up to 24 simultaneous phone calls. For more
information, please call Inovonics technical services at 800.782.2709, option
2.
6.1.1 Configure the Dialogic Board
1
Access the Radius interface and log in.
2
Click on “Install Setup.”
3
Click on “Process Setup.”
4
Select the drop down menu and choose “Telephony.”
5
Select “Add New Interface.”
6
Enter a descriptive name in the “Interface Name”.
7
Check the box for “Start Interface when Service Starts.”