A&D Weighing SJ-30KWP User Manual
Page 25
23
Item
Parameter
Description
0
Five-level (Result LED blinks.)
1
Five-level (Result LED lights.)
2
Three-level (Result LED blinks.)
3
Three-level (Result LED lights.)
4
Seven-level (Result LED blinks.)
Comparator mode
Cp-l
5
Seven-level (Result LED lights.)
Sets comparator
mode
0
Comparator disabled
1
Compares all data
2
Compares all stable data
3
Compares all data of
≥ +5d or ≤ -5d
4
Compares stable data of
≥ +5d or ≤ -5d
5
Compares data of
≥ +5d
Comparison
conditions
Cp
6
Compares stable data of
≥ +5d
Sets comparison
conditions
d = minimum display
in kg
0
Dark
1
2
3
Comparator
LED brightness
Cp-i
4 Bright
Adjusts LED
brightness of
comparison result
0
Normal comparison
Normal/Negative
comparison
Cp-p
1
Negative comparison for take-away
check weighing
Refer to
“9. AUTO-TARE”
0
Auto-tare function disabled
Auto-tare
function
at
1
Auto-tare function enabled
Refer to
“9. AUTO-TARE”
0
Immediately after OK and stable
1
0.5 second after OK and stable
2
1.0 second after OK and stable
3
1.5 seconds after OK and stable
4
2.0 seconds after OK and stable
5
2.5 seconds after OK and stable
6
3.0 seconds after OK and stable
7
4.0 seconds after OK and stable
8
5.0 seconds after OK and stable
Auto-tare timing
at-t
9
10 seconds after OK and stable
Timing to tare
automatically after
the comparison OK
and stable weight.
0
Function disabled
Auto-tare of the
initial weight
at-f
1
Tares the initial (container) weight.
Automatic operation
Factory setting