Safety precautions – A&D Weighing SJ-30KWP User Manual

Page 4

Advertising
background image

2

1. SAFETY PRECAUTIONS

All safety messages are identified by the following, “WARNING” or “CAUTION”,

of ANSI Z535.4 (American National Standard Institute: Product Safety Signs
and Labels). The meanings are as follows:

WARNING

A potentially hazardous situation which, if not avoided,
could result in death or serious injury.

CAUTION

A potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.


This manual is subject to change without notice at any time to improve the

product.

Product specifications are subject to change without any obligation on the part

of the manufacturer.

When using the SJ-WP, the following safety precautions should always be

followed.

WARNING Internal service or adjustment to this product should be performed

by a qualified person.

CAUTION

Avoid installing the scale in direct sunlight, which may cause discoloration
or malfunctions.

Do not mix battery types, or new and old batteries. Replace with all new
batteries at the same time.

If the scale is not to be used for a long period of time, remove all batteries
from the battery compartment to avoid leakage.

Avoid overloading the scale.

Avoid using the weighing platform to move the scale, as that could cause
damage to the scale.

Avoid chemical solvents. Clean the scale with water.


IP6 7








Degrees of protection against water: Protected against temporary submergence.

Degrees of protection against solid foreign objects: Dust-tight.
International Protection of IEC60529.

Advertising
This manual is related to the following products: