Canon IR3300 - Manual (Page 35)

Settings Menu 3-3
Pr
inter Settings Men
u Functions and Oper
ation
3
Settings Menu
NOTE
• The bold values indicate the default settings.
Copies 1-2000
Enables you to specify the number of copies printed. The default setting is
1, but you can specify up to 2000 copies.
2-Sided Printing On, Off
This parameter selects one-sided or two-sided printing. When 2-Sided
Printing is specified, the document is printed on both sides of the paper.
IMPORTANT
• Two-sided printing can use either the paper drawer or the
stack bypass tray, in sizes of A3, B4, A4, A4R, JIS-B5,
B5R, A5R, 11x17, Legal, Letter, Letter-R, Statement-R
and Executive.
• When printing on letterhead paper, or paper with a logo
etc., such as a cover sheet, please note the following
points.
- If the paper is fed from an internal paper drawer, the
print surface of the first page should be face-down.
- If the paper is fed from the stack bypass or the optional
paper deck, the print surface of the first page should be
face-up.
iR33/28/22RG.book Page 3 Thursday, May 10, 2001 5:27 PM