Canon IR3300 - Manual (Page 54)

PCL/PS Settings 3-22
3
Pr
inter Settings Men
u Functions and Oper
ation
Y Dimension 100 - 297 mm
Enables you to specify the Y dimension of the custom paper. The Y
dimension can be adjusted in increments of 1 mm.
This function can be very useful when part of the printed image is cut off.
By increasing the dimension some of the missing text may be correctly
printed. Make sure you do not increase the X dimension beyond the actual
size of the paper you are using for printing.
NOTE
• This function is not available if the Custom Paper option is
set to Off.
Append CR to LF Yes, No
This option allows the user to append the required carriage return to each
line feed.
Select Yes to append a carriage return to each line feed encountered in
backward-compatible PCL jobs (pure text, no job control).
PS (Printer Kit-C1 Only)
Job Timeout 0 - 3600 s
Enables you to specify the amount of time before a job times out. If data
has not finished within the set time limit, the job automatically cancels.
Wait Timeout 0 - 300 - 3600 s
Enables you to specify the amount of time a job will wait for data before it
times out. If data is not received within the set time limit, the job
automatically cancels.
Print PS Errors On, Off
This setting determines whether an error page is printed when an error is
encountered.
iR33/28/22RG.book Page 22 Thursday, May 10, 2001 5:27 PM