Canon IR3300 - Manual (Page 51)

Settings Menu 3-19
3
Pr
inter Settings Men
u Functions and Oper
ation
Transparency Inter-
leaving None, Blank, Printed
When printing on transparencies you can use this setting to output a sheet
of paper after each transparency. The paper can be blank, or it can be a
paper copy of the transparency.
If [None] is selected, no sheets are interleaved with the transparencies.
If [Blank] is selected, a blank sheet of paper is inserted between each
transparency.
If [Printed] is selected, a printed paper from the print job is inserted
between each transparency.
IMPORTANT
• The transparencies should be fed from the Stack Bypass
tray. The paper will be fed from a paper drawer.
NOTE
• If [Printed] is selected, the paper printouts are included in
the [Copies] count.
Personality Auto, PS, PCL
This selection enables the machine to process data received from the host
computer in the specified data format. Setting the Personality to Auto
causes the machine to determine the type of data received from the host
on a job-by-job basis. When printing from applications on a computer, we
recommended that you use the Auto setting.
NOTE
• If you find that the printer does not correctly switch to the
appropriate personality when Personality is set to Auto,
change the setting manually to match the data you are
sending from the host computer.
Initialize
The menu settings can be reset to the factory defaults by initializing the
printer settings.
When you select [Initialize], the confirmation message “Is it OK to initialize
the settings?” is displayed. If you select [Yes], the settings are initialized. If
you select [No], the settings are not initialized.
IMPORTANT
• Do not turn off the printer while the settings are being
initialized, as this may damage the machine’s memory.
iR33/28/22RG.book Page 19 Thursday, May 10, 2001 5:27 PM