BMW 2013 5 Series User Manual

Page 128

Advertising
background image

While standing

Before leaving the vehicle, secure it
against rolling.

Before leaving the vehicle with the engine run‐
ning, engage position P of the automatic trans‐
mission and apply the parking brake. Otherwise,
the vehicle may begin to roll.◀

The system brought the vehicle to a complete
standstill.

Green mark in the speedometer during a
brief idle phase:
The vehicle ahead of you drives away while
the mark is green: your vehicle accelerates
without anything having to be done.

Switch to orange of the mark in the speed‐
ometer after approx. 2 sec.:
The vehicle ahead of you drives away, while
the mark is orange: in order to accelerate,
briefly press the gas pedal or press the RES
button or SET button.

Rolling bars in the distance indicator mean that
the vehicle ahead of you has driven off.
You actively braked your vehicle to a halt by
pressing on the brake pedal and it is standing
behind another vehicle:

1.

Press the button to call up a stored

desired speed.

2.

Release the brake pedal.

3.

Press on the accelerator briefly, or press the
RES button or the rocker switch when the
vehicle ahead of you drives away.

Displays in the instrument cluster

Desired speed

The marking lights up green:
the system is active.

The marking lights up or‐
ange: the system has been
interrupted.

The marking does not light up: the system is
switched off.

With instrument display: the symbol is
displayed in the speedometer similarly
to the mark for the desired speed.

Brief status display

Selected desired speed.

If --- appears briefly on the display for Check
Control messages, it is possible that the system
requirements for operation are currently not
met.

Distance to vehicle ahead of you

The selected distance to the vehicle driving
ahead of you is shown.

Distance display

Distance 1

Distance 2

Distance 3

Distance 4
This value is set after the system is
switched on.

The system has been interrupted or
distance control is deactivated be‐
cause the accelerator is being
pressed; a vehicle was not detected.

Distance control is deactivated be‐
cause the accelerator is being
pressed; a vehicle was detected.

Rolling bars: the detected vehicle has driven
away.

Seite 128

Controls

Driving comfort

128

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

Advertising