BMW 2013 5 Series User Manual

Page 149

Advertising
background image

Air flows out of the vents for the upper body re‐
gion. Open them for this purpose.
Air is cooled as quickly as possible:

At an external temperature of approx.
32 ℉/0 ℃.

When the engine is running.

The air flow can be adjusted when the program
is active.

Automatic recirculated-air control/

recirculated-air mode

You can respond to unpleasant odors or pollu‐
tants in the immediate environment by tempo‐
rarily suspending the supply of outside air. The
system then recirculates the air currently within
the vehicle.

Press the button repeatedly to select
an operating mode:

LEDs off: outside air flows in continuously.

Left LED on, automatic recirculated-air con‐
trol: a sensor detects pollutants in the out‐
side air and controls the shutoff automati‐
cally.

Right LED on, recirculated-air mode: the
supply of outside air into the vehicle is per‐
manently blocked.

If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO but‐
ton on the driver's side to utilize the condensa‐
tion sensor. Make sure that air can flow onto the
windshield.

Continuous recirculated-air mode
The recirculated-air mode should not be

used for an extended period of time, as the air
quality inside the vehicle deteriorates steadily.◀

Cooling function

The passenger compartment can only be
cooled with the engine running.

Press the button.

The air is cooled and dehumidified and, depend‐
ing on the temperature setting, warmed again.

Depending on the weather, the windshield may
fog up briefly when the engine is started.
The cooling function is switched on automati‐
cally with the AUTO program.
When using the automatic climate control, con‐
densation water, refer to page

172

, develops

that exits underneath the vehicle.

Rear window defroster

Press the button.
The rear window defroster switches off

automatically after a certain period of time.

ALL program

The current settings on the driver's side
for temperature, air flow, air distribu‐

tion, and AUTO program are transferred to the
front passenger side and to the left and right
rear.
The program is switched off if the settings on
the front passenger side or in the rear are
changed.

Residual heat

The heat stored in the engine is used to heat the
interior.

Functional requirement

Up to 20 minutes after the engine has been
switched off.

Warm engine.

The battery is sufficiently charged.

External temperature below 77 ℉/25 ℃.

Switching on

1.

Switch off the ignition.

2.

Press the right side of the button on

the driver's side.

Seite 149

Climate control

Controls

149

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

Advertising