Changing wheels, Vehicle battery – BMW 2013 5 Series User Manual

Page 215

Advertising
background image

Squeeze the clips together and remove the bulb
holder.
Pull out the bulb and replace it.

Changing wheels

Notes

The vehicle equipment does not include a spare
tire.
When using run-flat tires or tire sealants, a tire
does not need to be changed immediately in the
event of pressure loss due to a flat tire.
The tools for changing wheels are available as
accessories from your service center.

Jacking points for the vehicle jack

The jacking points for the vehicle jack are lo‐
cated in the positions shown.

Vehicle battery

Maintenance

The battery is maintenance-free, i.e., the elec‐
trolyte will last for the life of the battery.
Your service center will be glad to advise you on
questions regarding the battery.

Battery replacement

Use approved vehicle batteries only
Only use vehicle batteries that have been

approved for your vehicle by the manufacturer;
otherwise, the vehicle could be damaged and
systems or functions may not be fully availa‐
ble.◀

After a battery replacement, have the battery
registered on the vehicle by your service center
to ensure that all comfort functions are fully
available and that any Check Control messages
are no longer displayed.

Charging the battery

Note

Do not plug the charger into the socket
Do not connect battery chargers to the

factory-installed sockets in the vehicle. Doing so
may result in damage to the vehicle.◀

Starting aid terminals

In the vehicle, only charge the battery via the
starting aid terminals, refer to page

219

, in the

engine compartment with the engine off.

Power failure

After a temporary power loss, some equipment
needs to be reinitialized.
Individual settings need to be reprogrammed:

Seat, mirror, and steering wheel memory:
store the positions again.

Time: update.

Seite 215

Replacing components

Mobility

215

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

Advertising