Care, Vehicle equipment, Car washes – BMW 2013 5 Series User Manual

Page 223

Advertising
background image

Care

Vehicle equipment

All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle,
e. g., because of the selected optional equip‐
ment or country variant. This also applies for
safety-related functions and systems.

Car washes

Notes

Steam jets or high-pressure washers
When using steam jets or high-pressure

washers, hold them a sufficient distance away
and use a maximum temperature of
140 ℉/60 ℃.
Ensure that a distance of at least 31.5 in‐
ches/50 cm is maintained at all times. Holding
them too close or using excessively high pres‐
sures or temperatures can cause damage or
preliminary damage that may then lead to long-
term damage.
Follow the operating instructions for the high-
pressure washer.◀

Cleaning sensors/cameras with high-
pressure washers

When using high-pressure washers, do not
spray the exterior sensors and cameras, e.g.,
Park Distance Control, for extended periods of
time and only from a distance of at least
12 in/30 cm.◀

Wash your vehicle frequently, particularly in win‐
ter.
Intense soiling and road salt can damage the ve‐
hicle.

Automatic car washes

Notes

Note the following:

Give preference to cloth car washes or those
that use soft brushes in order to avoid paint
damage.

Make sure that the wheels and tires are not
damaged by the transport mechanisms.

Fold in the exterior mirrors; otherwise, they
may be damaged, depending on the width of
the vehicle.

Deactivate the rain sensor, refer to
page

70

,to avoid unintentional wiper activa‐

tion.

In some cases, an unintentional alarm can be
triggered by the interior motion sensor of the
alarm system. Follow the instructions on
avoiding an unintentional alarm, refer to
page

43

.

Guide rails in car washes
Avoid car washes with guide rails higher

than 4 in/10 cm; otherwise, the vehicle body
could be damaged.◀

Before driving into a car wash

In order to ensure that the vehicle can roll in a car
wash, take the following steps:
Manual transmission:

1.

Release the parking brake.

2.

Drive into the car wash.

3.

Shift to neutral.

4.

Switch the engine off.

5.

Switch on the ignition.

Seite 223

Care

Mobility

223

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

Advertising