Auto start/stop function – BMW 2013 5 Series User Manual

Page 64

Advertising
background image

and downward inclines, further secure the vehi‐
cle, for example, by turning the steering wheel in
the direction of the curb. ◀

Before driving into a car wash

In order for the vehicle to be able to roll into a car
wash, heed the information regarding Washing
in automatic car washes, refer to page

223

.

Manual transmission

Switching off the engine

1.

With the vehicle at a standstill, press the
Start/Stop button.

2.

Shift into first gear or reverse.

3.

Set the parking brake.

Automatic transmission

Switching off the engine

1.

Engage transmission position P with the ve‐
hicle stopped.

2.

Press the Start/Stop button.
The engine is switched off.
The radio ready state is switched on.

3.

Set the parking brake.

Auto Start/Stop function

The concept

The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, e.g., in a traffic congestion or at traffic
lights. The ignition remains switched on. The
engine starts again automatically for driving off.
Certain vehicle components may experience
additional wear as a result of this system.

Automatic mode

The Auto Start/Stop function is operational after
each engine start.

This function is activated at speeds faster than
about 3 mph, approx. 5 km/h.

Engine stop

The engine is switched off automatically during
a stop under the following conditions:
Manual transmission:

Neutral is engaged and the clutch pedal is
not pressed.

The driver's safety belt is buckled or the
driver's door is closed.

Automatic transmission:

The selector lever is in transmission position
D.

The brake pedal remains pressed while the
vehicle is stationary or the vehicle is held by
Automatic Hold.

The driver's safety belt is buckled or the
driver's door is closed.

The air flow of the air conditioner is reduced
when the engine is switched off.

Displays in the instrument cluster

The display indicates that the
Auto Start/Stop function is ready
for an automatic engine start.

The display indicates that the
conditions for an automatic en‐
gine stop have not been satisfied.

Note

The engine is not switched off automatically in
the following situations:

External temperature below approx.
+37 ℉/+3 ℃.

The external temperature is high and auto‐
matic climate control is running.

Seite 64

Controls

Driving

64

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

Advertising