Top view – BMW 2013 5 Series User Manual

Page 138

Advertising
background image

Display settings

Brightness

With the backup camera switched on:

1.

Select the symbol.

2.

Turn the controller until the desired setting
is reached and press the controller.

Contrast

With the backup camera switched on:

1.

Select the symbol.

2.

Turn the controller until the desired setting
is reached and press the controller.

System limits

Detection of objects

High, protruding objects such as ledges may not
be detected by the backup camera.

Top View

The concept

Top View assists you in parking and maneuver‐
ing. The area around the doors and the road area
around the vehicle are shown on the Control
Display for this purpose.

General information

The image is captured by two cameras
integrated in the exterior mirrors and by the
backup camera.
The range is at least 7 ft/2 m to the side and rear.
In this way, obstacles up to the height of the ex‐
terior mirrors are detected early.

Notes

Check the traffic situation as well
Check the traffic situation around the ve‐

hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the cameras.◀

At a glance

Button in the vehicle

Top View

Cameras

The lenses of the Top View cameras are located
at the bottom of the exterior mirror housings.
The image quality may be impaired by dirt.
Clean the lens, refer to page

226

.

Switching on/off

Switching on automatically

Select transmission position R with the engine
running.

Seite 138

Controls

Driving comfort

138

Online Edition for Part no. 01 40 2 903 008 - 07 12 490

Advertising