Changing cook power, Cooking in more than one cycle or more cook powers, Do this – Whirlpool SM988PES User Manual
Page 19: This happens, Put tood in the oven and close the door, Touch cook 1, Count □□uun
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
.count
□□uun
The Display counts down
the time to show how muci'
cooking time is left in the
first cycle.
C
i ~ i
_/
u
1 1 o
For 2 of every 10 seconds,
the Display will show the
Cook Power you selected.
When the cooking time
ends, ''End" will show on
the Display and 4 beeps
will sound. (You can stop
the beeping by opening
the door or by touching
CANCEL.) “End" will remain
on the Display and a beep
will sound every 30 sec
onds (to remind you that
food is left in the oven) until
door is opened or CANCEL
is touched. The Display will
then show the time of day.
Changing cook power
The Cook Power can be changed any fime before touching START or during
the cycle.
• Touch COOK POWER.
• Touch a number for the new Cook Power.
• Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
• Touch COOK POWER twice if you want to change a lower Cook Power to
HIGH.
• Touch START.
Cooking in more than one cycle or more cook powers
For best results, some recipes call for one Cook Power for a certain length of
time, and another Cook Power for another length of time. Your oven can be set |
to change from one to another automatically.
DO THIS..
THIS HAPPENS..
1. Put tood in the oven
and close the door.
2.
Touch COOK 1.
The COOK 11ndicator
Light will come on and the
Display will show four O’s.
continued on next page.
19