Cobra Electronics 2000 - Manual (Page 100)

83
Utilities

Trail and

waypoint names
While on or viewing a trail, the here and zoom functions are available on the map as described
in the Useful tools discussion on page 66. In addition, the system treats a trail as a trip relative
to the page function. With it, the  Trip Data screen E can be used to see trail data from the
Trail Mode screen G as described in the Trip data screen discussion on page 72.
The system will apply default names to both trails and waypoints — Trail 1, Trail 2, Trail 3
and Point 1, Point 2, Point 3 and so on. User-defined names of up to ten characters can be
substituted for the default names either as the trails and waypoints are generated or at any
later time. However, the system named points [Beginning] and [End] cannot be changed.
At the  Trail Book menu B:
1. Scroll

or

to the name of the trail to be viewed and press the VIEW function
button and the  Map screen C will show the selected trail highlighted in magenta.
 NOTE
If the trail book is empty,
the system will display
the  Trail Book screen 1
with the option to start a
trail or return to the
 Main menu A.
1
View a trail . . . . . . . 
on the map
22 B Trail Mode 6/15/04 5:40 PM Page 83