Cobra Electronics 2000 - Manual (Page 70)

67
Zoom function . . . . 
C h a n ge zoom setting. . .

To shift the map image at  Map screen A or B:
1. Press the

,

,

and

buttons to move the current location in the corresponding direction on the Map image.
This will obscure some information at one edge and reveal additional information at the opposite one.
The zoom function can also be used in both the reference and navigation versions of the
 Map screen A and B. It allows five levels of zoom ranging from a wide area (level 5)
with reduced detail to a small area (level 1) with maximum available detail.
To change the zoom setting at the  Map screen A or B:
1. Press the ZOOM function button to proceed to the  Set Zoom Level menu 5.
2. Press the

or

button to move the highlight on the numbered zoom bar (at the left
of the LCD) to the desired zoom level.
The display will show the corresponding zoom effect (5 shows widest area) and will return
to the previous menu or screen three seconds after the last press of an

or

button.
5
S c roll map . . . . . . . . . . . .

18 B Route Guidance 6/15/04 5:38 PM Page 67