Cobra Electronics 2000 - Manual (Page 23)

22
If the system language was not changed to the user’s preference during the start up
sequence, it can be changed at the  Languages menu E at any time.
At the  Option menu B:
1. Scroll

or

to [Languages] and press ENTER.
2. At the  Languages menu E, scroll

or

to the desired language and press ENTER.
The language will be selected and the system will return to the  Main menu A.
This option allows the user to set current location when using trip planner. A point other than
the present location can be designated as the origin for the system to use in route development.
For instance, if the user is at home and wants to develop a route from the user’s office to a
customer’s location, the user can select this option to tell the system to start from the user’s
office rather than from home, where the user is at the time. After selecting a new current
location, all route instructions will be calculated from it until the user either selects another
current location or drives a vehicle with the system turned on and receiving GPS signals.
After moving a short distance, the system will override the current location the user set
and revert to the location determined by the GPS data.
Select language . . . . . . . 
English, French and
Spanish are available.
Ve h i c l e . . . . . . . . . . . . 
p o s i t i o n
L a n g u a g e . . . . . . . . . 
c h o i c e s
04 B Set Oper Pref 6/15/04 5:28 PM Page 22