Cobra Electronics 2000 - Manual (Page 34)

53
3 . At the  Mondays Trip screen D, press the ADD function
button to proceed to the  Add Destination to Trip menu E.
4. Scroll

o r

to one of the five methods of selecting a
destination and press ENTER to proceed to the menu
corresponding to the method chosen.
5. Proceed with the programming sequence for that choice as
described in each of the corresponding destination selection
sections or with the procedure below if Current Location is chosen.
 Address/intersection — see page 32.
 Point of interest — see page 38.
 Previous destination — see page 36.
 Address book — see page 46.
  Current Location screen 3:
1 . Press ENTER to confirm selection of the current location
as a destination and proceed to the  Enter Name of
Location menu 4.
2. Accept the default name shown or edit it to a preferable
one using spell mode.
 NOTE
Pressing ENTER instead
of the ADD function button
at the add destination screen
( Mondays Trip D) will
save the trip name as an
empty trip and return to
the  Trip Planner menu B.
3
4
14 B Trp Planner 6/15/04 5:36 PM Page 53