Cobra Electronics 2000 - Manual (Page 14)

P a rt II — Getting Start e d Nothing comes close to a Cobra ® 13
The NAV ONE should temporarily be removed when parking the vehicle to
prevent theft or heat damage. It may also be removed to transfer the entire
unit to a different vehicle or to use it at home or in the office to program a
trip plan using the optional Cobra indoor adapter.
To temporarily remove the NAV ONE from a vehicle:
1. Unplug the power cord from the vehicle’s 12 volt power socket.
2. Pull the QUICK RELEASE lever on the back of the unit and remove the
unit to store it in a protected location or to use indoors. The suction cup
portion of the bracket can be left attached to the windshield for quick
reinstallation of the unit.
To transfer the NAV ONE to a different vehicle:
1. Unplug the power cord from the vehicle’s 12 volt power socket.
2. Rotate the lock lever off the PRESS button, then pull the tab
to release the suction cup.
3. Move the unit to the other vehicle and install it as described on page 10.
To use the NAV ONE at home or in the office to program a trip plan:
1. Connect the unit to an electrical outlet using an optional Cobra indoor
adapter developed especially for use with the NAV ONE. See the
Accessories and order form section on page 102 for information
on ordering a Cobra adapter.
2. Turn the unit on and program the desired trip as described in
the Trip planner section.
Transferring the

NAV ONE
Using the GPS

unit at home or
in the office
R e m oving the . . . . . . . . . 
NAV ONE
Temporary removal 
The suction cup portion of the bracket can
be left attached to the windshield for quick
reinstallation.
01 Intro 6/15/04 5:26 PM Page 13