Cobra Electronics 2000 - Manual (Page 44)

49
The infrared port on the NAV ONE (NAV ONE 3000 only) can receive
data from PDA’s if they are equipped with a compatible port. To use
this feature, the data item(s) to be transferred to the NAV ONE system
must be selected and prepared for transmission according to the
operating instructions for the sending device.
Once the sending device is ready and its infrared port is aimed at the
infrared port on the GPS unit, at the Infrared Transfer screen 2:
1. Activate the sending device.
The system will proceed to the  Infrared Transfer screen 3, then to one of two possible results:
 Transfer unsuccessful  Transfer complete
If the data transfer is unsuccessful, a screen such as the  Address Book screen 4 will appear
with an error code explaining what went wrong with the transfer. (An address validation screen
may appear briefly before the error message.) Pressing ENTER at the  Address Book screen 4
will return the system to the  Infrared Transfer screen 2 where two actions are available:
 The transfer can be repeated after the error has been corrected.
 The BACK function button can be pressed to exit the infrared transfer mode and return to the
 Add to Address Book menu F.
Entry using infrared

Infrared . . . . . . . . . . . . . .

Transfer

unsuccessful
4
3
PDA positioned for
infrared transfer
12 B Add Bk 6/15/04 5:34 PM Page 49