Cobra Electronics 2000 - Manual (Page 22)

21
 Units — provides a choice of English or metric values.
 SmartPower — when SmartPower is off, the system operates until it is turned off with the POWER button.
When SmartPower is on, it shuts down the system in response to a combination of all three conditions:
 No vehicle motion or satellite lock for 10 minutes  No button presses for 10 minutes
 Engine not running as indicated by supply voltage.
 Key click — provides a choice of beep to confirm button press or silent operation.
Set clock is a function. It is available only at the the  Preferences menu C (see clock icon).
At the  Option menu B:
1. Scroll

or

to [Preferences] and press ENTER.
2. At the  Preferences menu C, scroll

or

to the option to be changed.
3. Press the

or

button to change the option to the desired value.
4. Repeat steps 2 and 3 for as many options as are to be changed, then press
ENTER or the SET function button.
The changes will be accepted and the system will return to the  Main menu A.
 NOTE
With SmartPower off and
the unit plugged into a power
socket that does not turn
off with the ignition, NAV ONE
system operation at full power
can drain the vehicle’s battery
if parked for a long time,
such as at an airport lot.
Cobra recommends this
feature be left at the
factory setting of on.
 NOTE
If the desired option
cannot be seen:
1. Scroll

or

until it
comes on the screen.
Set preferences . . . . . . .

04 B Set Oper Pref 6/15/04 5:28 PM Page 21