Brother FAX-400 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IV-2 . SENDING A FAX
Automatic radiating
Automatic redialing can only be used for faxes that were sent using
automatic transmission - not for telephone calls. You can turn
automatic redialing on or off (see page IV-1-10).
When using automatic transmission to send a fax, if the destination
number is engaged, the machine will automatically redial the
number up to three (3) times at five (5) minutes intervals.
-
Before using automatic redialing, you can send a different fax
message or make a copy of a document using the 'Interrupt"
feature.
(See page V-10-1.)
- To cancel automatic redialing, press
FUNCTION
key, then press
the
9
key to enable the "Cancelling a Transmission" function.
(See page V-11-1.)
Manual redialing
HOOK
or I
I
If you are manually sending a fax or using the unit as a telephone
and you obtain a busy signal, carry out the following procedure.
1) Replace the handset or press the HOOK key.
HOOK
or I .............. —I
2) Pick up the handset or press the HOOK key.
PAUSE/REDIAL
I------ I
3) When you hear the dialing tone press the REDIAL key. The
machine now redials the number it dialed last.
START
4) If you are sending a fax, press the START key when you hear the
answering fax tone. If you are making a telephone call, simply
proceed when the called party answers.
lV-2-5