Brother FAX-400 - Manual (Page 75)

IV-1. CONFIGURING THE MAGHINE
4) Press the SET key.
F A X :
I N P U T / P R E S S S E T T O E N D
O ”'©
-‘Q "“Q
0 “© ©
5) Enter your fax number (which can be up to 20 digits long) using
the number keys. The procedure for entering numbers is
described in detail in the section
Entering information using the
keys in this chapter.
6) Press the SET key when you have entered the fax number
correctly.
If you wish to input a (INTERMATIONAL DIALING CODE
PREFIX) at the first position^ press the "Chain" key and continue to
enter the number, using the correct international dialing code, and
omitting any "ZERO" at the beginning of the national area dialing
code.
T E L :
I N P U T / P R E S S S E T T O E N D
© '"© "0
^0 ^^0 ““0
"© "0 "’©
0 “0 0
INTERRUPT
7) Now enter your telephone number (which can be up to 20 digits
long) using the number keys.
8) Press the S ET key when you have entered the telephone number
correctly.
N A M E :
I N P U T / P R E S S S E T T O E N D
0 ^"0 “'0
'0 '"‘0™0
'0 '“'© “0
©
0
©
9) Enter the name you wish to appear on the faxes that you send
using the number keys. The name can be up to 20 letters long
including spaces. The procedure for entering names is described
in detail in the
sectionEnteringinformation using the keys in this
chapter.
10) Press the SET key when you have entered your name.
- The telephone number is only used for the Call Back Message,
super COVERPAGE.
- If you do not enter a fax number you cannot enter anything else.
- You cannot enter a ''-"using the PAUSE key when registering
your fax and telephone number. Use the (e-/—>) cursor key instead
to enter a space. It will be printed as hut not be displayed.
-----------------------------------------------------------------------------------------------------------------------------------------
IV-1-3