Kenmore 808353 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1 Connect the meter ieads to liie red motor lead and any white
2
Timer contacts for the drain phase are BLU-VELLOW to BLU-RED,
Figure34 is a diagram of the motor cirotii Note that the drain or wash start winding is energized through separate
timer contacts. Therefore, failure of the motor to start in either the drain or wash cycle may be caused by a defective
timer and not a defective motor.
/VOTE
When checking anelectrical circuit, always exercise extreme caution, and refer to the wiring diagram if available.
CONNECTOR
OR CONNECTED DIRECTLY TO TERMINAL
BLOCK OF DISHWASHER
F I G U R E 3 4
3 5
Advertising