Sharp cs-2850 - Manual (Page 10)

^ GRAND TOTAL KEY:
Prints and clears the “GT memory contents.
gj NON-ADD/SUBTOTAL KEY:
Non-add - When this key is pressed right after an entry of a number in
the Print mode, the entry is printed on the Jeft-hand side with
the symbol
This key is used to print out numbers not subjects to calculation
such as code, date, etc.
Subtotal - Used to get subtotal(s) of additions and/or subtractions. When
pressed following the [2 or EH key, the subtotal is printed
with the symbol “0" and V n e calculation may be continued.
By pressing this key even in the Non-print mode, the displayed number
Is printed with the symbol “P”.
g TOTAL KEY:
Prints the total of addition and subtraction with the symbol “ *". This key
also serves as a clear key for the calculation register and resets an error
condition.
CE
©
©
CLEAR ENTRY KEY:
Clears number entered prior to use of a function key.
Also used to clear an overflow error caused by an entry.
Ex. 123 1 2 3 x 4 5 6 =
Press 123 0 455 0 456 [|]
B
® Q
NUMERAL KEYS:
MINUS EQUALS KEY:
Prints the entered number with a symbol and subtracts the number from
the contents of the calculation register. This key is also used to obtain the
product/quotient in negative multiplication and division and prints it with the
symbol “ *".
PLUS EQUALS KEY:
Prints the entered number with a “+" symbol and adds the number to the
contents of the calculation register. This key is also used to obtain the results
in multiplication and division and prints the product/quotient with the symbol
"
PERCENT KEY
DIVISION KEY
MULTIPUCATION KEY