Sharp cs-2850 - Manual (Page 27)

BALANCE CALCULATION
Setting the batance mode selector to the “BA" position makes balance calculation
possible. In other words, the calculations are performed and the balance is always
printed out.
In the balance mode, the entry and balance only for addition and subtraction (by the
(T) and g key operations) can be printed out.
Also, the entry is printed on the left hand side of the paper and the balance is printed
with the symbol “0” on the right hand side of the paper.
EXAMPLE:
Entry Balance
123.00 + 123.00
456.00 + 579.00
234.00 - 345.00
Total 345.00
26