Sharp cs-2850 - Manual (Page 9)

0
2) When the grand total mode selector is in the ON
position (GT), the counter will count the number of
times that the calculation results have been stored in
the grand total memory. To print and clear №e count,
press the @ key.
3) (only CS-2850)
The memory item counter will count the number of
times that the @ key has been pressed in the addi­
tion.
Note: • Each time the EÜ is missel in the sub-
straction, 1 will be subtracted from the count.
• The count is printed when the memory is
recalled.
• Pressing of the @ key clears the counter.
“IC+" position - 1) The counter will count the number of times that the [|]
or Ei has been pressed in addition and subtraction.
Note: • The count is printed when the calculated
result is obtained.
• Pressing of the @, (x] , g], iavgi (only
CS-2850) or |MU| key clears the counter.
2) When the grand total mode selector is in the ON
position (GT), the counter will count the number of
times that the calculation results have been stored in
the grand total memory. To print and clear the count,
press the © key.
3) (only CS-2850)
The memory item counter will count the number of
times that the 0 or EÜ key has been pressed in
addition and subtraction.
Note: • The count is printed when the memory is
recalled.
• Pressing of the 0 key clears the counter,
position: Neutral, counter is turned off.
Note: The counter has a maximum capacity of 3 digits (up to ±999). if
the count exceeds the maximum, the counter will recount from
zero.
PAPER FEED KEY:
When pressed, advances the paper.
Note: You can also pull the paper manually.
RIGHT SHIFT KEY:
Operation of this key in entered numbers or calculated results shifts the
number one digit to the right together with the decimal point. Used for one
digit correction.