Ink ribbon replacement – Sharp cs-2850 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INK RIBBON REPLACEMENT
1. Remove the paper roll tape from the calculator. {Tear the paper and remove from
the print mechanism by using the paper feed key.)
2. Set the power switch at OFF position.
Make sure that the print wheel has stopped.
3. Remove the printer cover by sliding it towards the back of the calculator. (See Fig.1)
* Roll the display downwards till it stops.
4. Remove the used ribbon.
5. Install the new ribbon.
6. With the black side of the ribbon facing upwards, place one of the reels on the reel
shaft on the left. Make sure that the reel is securely in place.
7. Thread the ribbon around the outside of the metal guides. (See Fig, 2)
8. Insert the right reel securely.
9. Take up any slack by manually turning one of the reels.
10. Replace the cover.
11. Replace the paper roll.
Printer cover
Fig. 2
Ink ribbon
Correct
method
Wrong
method
10