Kenwood SC102/2WH - Manual (Page 18)

SERVICE CHECK
Please check the following points before calling a Service Engineer.
1. If your appliance doesn’t work
CHECK that it is connected to the mains suppiy correctly, that the main appliance fuse is
working and that it is switched on at the wall control panel.
2. If the oven indicator does not come on and the oven does not heat up.
CHECK with the instructions that the timer is set for manual cooking, and is not left on an
automatic setting.
3. If the oven temperature appears to be too high or too low
CHECK that the temperatures recommended in the Instruction Book are being used and suit
the type of oven. According to the tin and dish sizes and your own individual preferences,
be prepared to alter the temperature either up or down 10°C or adjust cooking time to achieve
the result you want.
4. If the timer control does not work
CHECK that the operating instructions are being followed, particularly when setting an
automatic programme and returning the cooker to manual operation after automatic use.
If you need to contact the Service Department details are given on the back of this booklet.
Please ensure that you know the model number, serial number (both found on the rating plate
on the appliance) and when the appliance was purchased.
The Service Receptionist may wish to know the results of having carried out the above
checks.
16