Canon CDI-E151-010 - Manual (Page 132)

130 9. Additional Features
3
Select images for printing.
Single Images
z When the print type
(p. 131) is set to
[Standard] or [Both],
select an image using
the
W or X arrow. You
can set the number of
copies (up to 99) to be
printed using the
S or
T arrow.
z When the print type
(p. 131) is set to
[Index], select an
image using the
W or
X arrow and mark or
remove marks from
images using the
S or
T arrow. A check mark appears on the marked
image.
z You can use the same procedures to select
images in index playback (3 images).Press the
zoom button's
or button to switch
between single image playback and index
playback.
Number of copies
All the Images on the
CF Card
z Press the zoom
button's or
button to switch to
index playback (3
images).
z You can set one copy
of each image to print by pressing the SET
button, then selecting [Mark all] using the
S or
T arrow, and pressing the SET button again.
z When the print type is set to [Standard] or
[Both], the setting for the number of print copies
can be changed for each image. When [Index]
is selected, the print settings can be deleted.
For the instructions on changing settings,
please reread Step
3 from the beginning.
z You can cancel all the settings by selecting
[Clear all].
z You can select images using the W or X arrow
and change the settings using the S or T
arrow after [Mark all] or [Clear all] has been
selected.
Number of copies