Canon CDI-E151-010 - Manual (Page 158)

156 Appendix
Battery Performance
(Battery Pack NB-2LH at full charge)
CIPA standard
* The actual figures will vary according to the
shooting condition and settings.
Test Conditions
Shooting: Normal temperature (23 °C ± 2 °C/73 °F ± 3.6 °F),
normal relative humidity (50% ± 20%), alternating
wide angle end and telephoto end shots at 30
second intervals with the flash fired once every
two shots and the camera power turned off after
every tenth shot. Power is left off for a sufficient
amount of time*, then the power is turned back on
and the testing procedure is repeated.
• The included memory card is used.
• The LCD monitor is set to its factory default
brightness.
* Until the battery returns to normal temperature
Canon standard
* The data above reflects standard Canon testing conditions.
The actual figures will vary according to the shooting
conditions and settings.
Number of Images Shot Approx. 140 shots
Number of Images Shot
Playback Time
LCD Monitor on LCD Monitor off
Approx. 240 Approx. 550 Approx. 3 hours 30 min.
Test Conditions
Shooting: Normal temperature (23 °C/73 °F), alternating
wide angle and telephoto end shots at 20-second
intervals with flash fired once every four shots and
camera power turned off and on every eighth shot.
CF card used. LCD monitor brightness set to
factory default.
Playback: Normal temperature (23 °C/73 °F), continuous
playback at one image per 3 seconds. CF card
used. LCD monitor brightness set to factory
default.
See Battery Pack Handling Precautions (p. 17).
z Movie data is excluded.
z At low temperatures, the battery pack performance may
diminish and the low battery icon appear very rapidly.
In these circumstances, the performance can be
improved by warming the battery pack in a pocket before
use.