Canon CDI-E151-010 - Manual (Page 31)

1. Preparing the Camera 29
*3 The value for each content also appears.
*4 The icon does not display in Shooting mode.
*5 PowerShot S70 only
*6 Zoom powers reflect the combined optical and digital zoom
effects. "3.6x" is the telephoto-end setting of the optical zoom.
The following information may also appear with some
image files.
Š Even in the no information display mode,
shooting information appears for approximately 6
seconds (shooting information may not appear
depending on the camera settings at that time).
Š The camera shake warning icon will appear
on the LCD monitor in low light conditions while
the camera is preparing to shoot. When this
icon appears, use one of the following shooting
methods.
- Set the flash to On or Auto
- Fix the camera to a tripod
An audio file other than a wave file, or a file with an
unrecognized format, is attached.
JPEG file with format not conforming to Design rule for
Camera File System Standards.
File with unrecognized format.
Š Please note that image information recorded
by this camera may not display correctly on
other cameras and image information recorded
by other cameras may not display correctly on
this camera.
Š Overexposure Warning
Overexposed portions of the image blink. The
overexposure warning appears at the following
times.
- When reviewing an image in the LCD monitor
(information view) right after it is shot
- In the detailed display mode of the Playback
mode