Canon CDI-E151-010 - Manual (Page 18)

16 1. Preparing the Camera
aInsert the CF card with its label
facing towards you and close the CF
card slot / battery cover.
z Push the card in until the CF card eject button
fully extends. To remove the CF card, push the
CF card eject button and pull the card out.
a
Label
CF Card Eject
Button
Š This is a lithium ion battery pack so there is no
need to completely use or discharge it before
recharging. It can be recharged at any time.
Š It takes approximately 90 minutes to bring a
fully discharged battery pack to full charge
(based on Canon's testing standard). Charge it
within a temperature range of 5 to 40 °C (41 to
104 °F).
Š You may hear a noise during charging. This is
not a malfunction.
zPlease note that CF cards formatted with
other manufacturers' cameras or a computer,
or formatted or edited with application
programs, may slow down writing to the CF
card or prevent the card from operating
correctly in the camera.
zSee CF Cards and Estimated Capacities
(Recordable Images) (p. 157).
zYou are recommended to use CF cards that
have been formatted in your camera (p. 19).
The card supplied with the camera may be
used without further formatting.